top of page

Fog Mist vs Revere Pewter: The Comparison That Actually Helps You Decide

Fog Mist and Revere Pewter are both warm Benjamin Moore greiges, and both get pulled into the same shortlist by anyone searching for a gray that doesn't read cold. That's where the similarity ends. Fog Mist sits at the near-white end of the greige spectrum and behaves like a light, airy backdrop. Revere Pewter sits sixteen LRV points lower, squarely in the mid-tone range, and behaves like an anchoring neutral with real depth. Put them side by side and the question isn't which greige is nicer - it's which depth of room your walls actually need.

 

Fog Mist OC-31 has an LRV of 71 and reads as a soft, quiet, near-white greige with the faintest warm gray-green cast. It recedes. Revere Pewter HC-172 has an LRV of 55 and reads as a genuine mid-depth warm greige with a taupe base and a green undertone that surfaces in cooler light. It doesn't recede - it grounds the room. That gap is the whole story of this comparison.

 

This guide covers exactly how Fog Mist and Revere Pewter differ in undertone, LRV, light behaviour, and room application - including where they work together and where one alone is the better call.

 

Benjamin Moore Fog Mist vs Revere Pewter
Benjamin Moore Fog Mist vs Revere Pewter

At a Glance

 

 

Fog Mist OC-31

Revere Pewter HC-172

Brand

Benjamin Moore

Benjamin Moore

LRV

71 - a light, airy off-white greige

55 - a true mid-depth greige with visible presence

Colour category

Near-white greige - reads as a soft, quiet neutral

Mid-tone warm greige - reads as an anchoring neutral, not a near-white

Undertones

Warm gray with a faint green cast - subtle, never assertive

Warm taupe base with a low-level green undertone that surfaces in cool or flat light

Character

Quiet, airy, recessive - a backdrop colour that holds light without announcing itself

Grounded, earthy, and confidently mid-depth - a colour that contributes real weight to a room

North-facing

Good - stays soft and even, though the green cast can firm up slightly

Fair - the green undertone can step forward and read slightly flat or olive in cool light

South-facing

Excellent - glows gently without washing out

Excellent - the warm taupe dominates and the colour reads rich and inviting

Open-plan

Excellent - consistent across zones, low commitment to any one undertone

Good - most consistent in warm-lit zones; can shift noticeably between exposures

On walls

Airy, light-filled backdrop - walls recede rather than anchor the room

A committed mid-depth backdrop - walls read as a deliberate warm gray, not a whisper of one

On cabinets

A soft, understated off-white for cabinetry that wants to blend, not stand out

One of BM's most specified mid-tone greige cabinet colours - grounded and traditional

Use together?

Yes - Fog Mist on trim or ceiling against Revere Pewter walls is a classic light-on-mid pairing

Revere Pewter on lower cabinets or an accent wall against Fog Mist elsewhere reads as considered depth, not clutter

Trim for each

Chantilly Lace or Simply White for crisper definition against Fog Mist walls

White Dove or Chantilly Lace for clean definition against Revere Pewter's depth

Style fit

Transitional, coastal, quiet contemporary, soft farmhouse

Traditional, transitional, industrial-warm, classic

Architect's pick

When the brief is a light, low-commitment neutral that recedes and lets furnishings lead

When the brief calls for a neutral with actual depth and presence rather than a light backdrop

 

BM Fog Mist OC-31 - What It Really Looks Like

 

Benjamin Moore Fog Mist
Benjamin Moore Fog Mist

Fog Mist has an LRV of 71 - a light, quiet greige that sits close to the white end of Benjamin Moore's Off-White collection. The undertone is a warm gray with the faintest green cast, subtle enough that it rarely reads as a distinct colour at all. It simply softens the space it's in.

 

Fog Mist does not carry weight. It carries quiet. On walls it creates a soft, light-filled backdrop that recedes behind furnishings and architectural detail rather than competing with them. It is one of the more forgiving BM greiges for rooms with average or below-average natural light, since its high LRV keeps it from ever reading dim or heavy. For the fuller comparison of how Fog Mist performs against a warmer, more committed BM white, the Alabaster vs Fog Mist guide covers that distinction in full.

 

BM Revere Pewter HC-172 - What It Really Looks Like

 





Benjamin Moore Revere Pewter
Benjamin Moore Revere Pewter

Revere Pewter has an LRV of 55 - squarely mid-range, and the number that defines everything about how this colour behaves. The base is a warm taupe, with a low-level green undertone sitting beneath it that stays hidden in good light and surfaces when the light turns cool or flat.

 

Revere Pewter does not recede. It grounds. In a sun-filled south or west room the taupe dominates and the colour reads rich, warm, and classic. In a dim or north-facing room the green undertone steps forward and the colour can read slightly olive or muddy - a trait that makes light direction more decisive for Revere Pewter than for a near-white. For how Revere Pewter compares to a lighter BM greige in the same mid-tone family, the Pale Oak vs Revere Pewter guide covers exactly where the depth and undertone diverge.

 

The Real Difference Between Fog Mist and Revere Pewter

 

Walls: Benjamin Moore Fog Mist
Walls: Benjamin Moore Fog Mist

Fog Mist is a light, recessive off-white greige. Revere Pewter is a committed mid-depth greige with real weight. They aren't two shades of the same idea - they're two different depths of neutral serving two different jobs in a room.

 

The 16-point LRV gap between them is the single most important number in this comparison. Fog Mist at LRV 71 will always read light and airy, holding brightness even in rooms with modest natural light. Revere Pewter at LRV 55 will always read as a mid-tone - present, grounding, and noticeably more affected by orientation. A north-facing room that flatters Fog Mist can make Revere Pewter look muddy; the same room rarely does the reverse.

 

The two also carry their green undertone differently. Fog Mist's green cast is faint enough to stay in the background at almost every LRV level this light. Revere Pewter's green undertone is more assertive precisely because the colour sits at mid-depth, where undertone has more surface area to express itself - which is why comparing it against a similarly warm, similarly structured BM greige matters before committing to either. For the fuller picture of how Revere Pewter performs against another BM mid-tone in its own depth range, the Pale Oak vs Revere Pewter guide breaks down exactly where Revere Pewter's undertone becomes more visible and where a lighter greige still gets the job done.

 

Not sure which one works for your room? A colour consultation is included in all our design packages - book directly here.

 

When to Choose Fog Mist

 

Walls: Benjamin Moore Fog Mist
Walls: Benjamin Moore Fog Mist

Choose Fog Mist when the brief is a light, quiet, low-commitment greige. Rooms with modest natural light where a mid-depth gray would feel heavy. Open-plan spaces that need a neutral consistent enough to read the same in every zone. Trim, ceilings, or adjoining rooms alongside a deeper greige elsewhere in the scheme.

 

Fog Mist is also the right call when Revere Pewter feels like too much depth for the room. If the space is small, dim, or north-facing and a mid-tone greige risks reading flat, Fog Mist delivers the same warm-gray family without the weight.

 

When to Choose Revere Pewter

 

Walls: Benjamin Moore Revere Pewter
Walls: Benjamin Moore Revere Pewter

Choose Revere Pewter when the brief calls for a neutral with genuine depth. South or west-facing rooms with strong natural light where the warm taupe base can dominate. Traditional and transitional interiors that want a grounding, classic mid-tone rather than a whisper of gray. Cabinetry or accent walls where real presence is the goal.

 

Revere Pewter is also the right answer when Fog Mist feels too light or too insubstantial for the room. If the space is large, well-lit, and needs a neutral that actually contributes weight to the palette rather than simply brightening it, Revere Pewter delivers that depth.

 

How the Pairings Differ

 

Walls: Benjamin Moore Fog Mist
Walls: Benjamin Moore Fog Mist

Fog Mist on walls pairs cleanly with Chantilly Lace or Simply White trim for crisp definition, and with warm woods and pale stone that don't fight its quiet gray-green cast.

 

Revere Pewter on walls wants White Dove or Chantilly Lace trim to hold clean contrast against its mid-depth warmth, and performs best with warm wood floors and aged brass or bronze hardware that lean into its taupe base rather than compete with it.

 

For flooring, Fog Mist is flexible enough for warm or cool floors alike given how little undertone it carries at LRV 71. Revere Pewter is strongest against warm wood and natural stone - cool-toned flooring can pull its green undertone forward more than intended.

 

For hardware, Fog Mist accepts nearly any finish without friction. Revere Pewter favours warm metals - aged brass, bronze, and warm nickel read as intentional; cool chrome can make the undertone feel slightly more clinical than the colour's character suggests.

 

Architect's Verdict - Fog Mist or Revere Pewter?

 

Walls: Benjamin Moore Revere Pewter
Walls: Benjamin Moore Revere Pewter

These two Benjamin Moore greiges are not interchangeable, and the choice between them comes down almost entirely to how much depth the room can carry.

 

If the brief is a light, quiet backdrop that recedes and lets furnishings do the talking - Fog Mist is the answer. It holds brightness in rooms with average or below-average natural light and never overwhelms a small or dim space.

 

If the brief is a neutral with genuine presence - one that grounds a room rather than disappearing into it - Revere Pewter is the answer. It needs warm light and warm materials to perform at its best, but rewards both with a rich, classic result.

 

Test the deciding factor before you commit: paint a large sample of each on the darkest, most north-facing wall in the room, and check it again at dusk. If Fog Mist still reads soft and neutral rather than flat, it passes. If Revere Pewter still reads warm taupe rather than tipping visibly olive, it passes too - and if only one of them does, that's your answer.

 

Frequently Asked Questions

 

Walls: Benjamin Moore Revere Pewter
Walls: Benjamin Moore Revere Pewter

Is Fog Mist lighter than Revere Pewter?

 

Yes - by 16 LRV points. Fog Mist has an LRV of 71 and Revere Pewter has an LRV of 55. Fog Mist reads as a light, near-white greige. Revere Pewter reads as a true mid-depth warm gray. The two sit in clearly different brightness categories.

 

Can Fog Mist and Revere Pewter be used together?

 

Yes. Fog Mist on trim, ceiling, or an adjoining room against Revere Pewter walls creates a considered light-and-mid-depth pairing within the same warm greige family. The 16-point LRV gap gives enough contrast to read as deliberate rather than mismatched.

 

Which one is better for a north-facing room?

 

Fog Mist handles north-facing rooms more predictably. Its lighter LRV and fainter undertone stay soft and neutral in cooler light. Revere Pewter's green undertone is more likely to surface and read flat or slightly olive in the same conditions, so it needs warmer, more direct light to perform at its best.

 

Does Revere Pewter look gray or beige?

 

Both, depending on the light. Revere Pewter's warm taupe base reads closer to beige in warm, sunlit rooms and shifts toward gray in cooler or flatter light, with a low-level green undertone underneath that becomes more visible in those conditions.

 

What is the LRV of Fog Mist vs Revere Pewter?

 

Fog Mist OC-31 has an LRV of 71 and Revere Pewter HC-172 has an LRV of 55. The 16-point gap places them in different depth categories entirely - Fog Mist as a light, airy off-white greige, and Revere Pewter as a grounded, mid-tone warm gray.

 

Final Thought

 

Fog Mist and Revere Pewter are not competing for the same wall. One is built to recede, the other to anchor, and the 16-point LRV gap between them makes the decision more about the room than about taste.

 

Light, airy, low-commitment greige for walls that need to recede - Fog Mist. Grounded, mid-depth warm greige for walls that need real presence - Revere Pewter. Sample both at scale on your darkest wall before deciding. The depth gap will settle the question faster than any swatch on a countertop.

 

Want a complete colour scheme built around Fog Mist or Revere Pewter? Our design packages cover full palette selection, finish recommendations, and 3D visualisations - see our packages.

 

About the Author

 

Beril Yilmaz is a qualified architect and interior designer based in the UK. She runs BY Design And Viz, a design platform covering paint colour reviews, interior design guidance, and residential design projects. Beril has specified both Benjamin Moore Fog Mist and Revere Pewter across residential projects in the UK and internationally - Fog Mist as a light, low-commitment backdrop in rooms with limited natural light, and Revere Pewter as a grounding mid-tone neutral in sun-filled traditional and transitional interiors where the room can carry real depth.

 

Comments


cdcdv.jpg

Hi, I’m Beril, a designer BY Design And Viz. I share expert home design ideas, renovation tips, and practical guides to help you create a beautiful, timeless space you’ll love living in.

join the club

Subscribe to our email newsletter and we'll send you a FREE Home Renovation Planner.

Breakfast at Home

BUILD THE HOME YOU'VE ALWAYS WANTED

Start your project today.

Choose a design package that meets your needs from our selection. Work with our designers one on one to achieve your dreams.

bottom of page